For AC repair service in Plymouth IN, call Peregrine!
Call Today: (574) 935-4634
Providing Indoor Comfort Since 1959
Office/Showroom
610 E. Jefferson St.
Plymouth, IN 46563
Leave a review of a recent AC repair we've done for you in Plymouth IN on Google!
For more info on Air Conditioning repair in Rochester IN, read our Blog.
For your Air Conditioner repair in Plymouth IN, trust a NATE certified customer.
For Air Conditioning maintenance tips in Plymouth IN; follow us on Twitter.
For Air Conditioner repair in Culver IN; like us on Facebook!
For Cooling repair in Plymouth IN, follow us on Youtube!
1-855-5bryant 1-855-527-9268


Absorption Heat Pumps

Absorption Heat Pumps

Absorption heat pumps are essentially air-source heat pumps driven not by electricity, but by a heat source such as natural gas, propane, solar-heated water, or geothermal-heated water. Because natural gas is the most common heat source for absorption heat pumps, they are also referred to as gas-fired heat pumps. There are also absorption (or gas-fired) coolers available that work on the same principle. Unlike some absorption heat pumps, however, these are not reversible and cannot serve as a heat source.

Residential absorption heat pumps use an ammonia-water absorption cycle to provide heating and cooling. As in a standard heat pump, the refrigerant (in this case, ammonia) is condensed in one coil to release its heat; its pressure is then reduced and the refrigerant is evaporated to absorb heat. If the system absorbs heat from the interior of your home, it provides cooling; if it releases heat to the interior of your home, it provides heating.

The difference in absorption heat pumps is that the evaporated ammonia is not pumped up in pressure in a compressor, but is instead absorbed into water. A relatively low-power pump can then pump the solution up to a higher pressure. The problem then is removing the ammonia from the water, and that's where the heat source comes in. The heat essentially boils the ammonia out of the water, starting the cycle again.

A key component in the units now on the market is generator absorber heat exchanger technology, or GAX, which boosts the efficiency of the unit by recovering the heat that is released when the ammonia is absorbed into the water. Other innovations include high-efficiency vapor separation, variable ammonia flow rates, and low-emissions, variable-capacity combustion of the natural gas.

Although mainly used in industrial or commercial settings, absorption coolers are now commercially available for large residential homes, and absorption heat pumps are under development. The 5-ton residential cooler systems currently available are only appropriate for homes on the scale of 4,000 square feet or more.

Absorption coolers and heat pumps usually only make sense in homes without an electricity source, but they have an added advantage in that they can make use of any heat source, including solar energy, geothermal hot water, or other heat sources. They are also amenable to zoned systems, in which different parts of the house are kept at different temperatures.

The efficiency of air-source absorption coolers and heat pumps is indicated by their coefficient of performance (COP). COP is the ratio of either heat removed (for cooling) or heat provided (for heating) in Btu per Btu of energy input.


U.S. Department of Energy - Energy Efficiency and Renewable Energy

Check Out Our
Specials & Coupons
Look At Our
Financing Options
Request Information
or Get an Estimate
Energy Savings
Tips
Client Comments
"One of the best things that I have ever done was to have a geothermal system installed by Huntington Heating."
Doyle Hoover, Wabash Indiana
Peregrine Heating & Cooling is a Bryant Factory Authorized AC dealer in Rochester IN.
610 E. Jefferson Street - Plymouth, IN 46563 - 574-935-4634
Air Conditioning Repair Service in Rochester IN
Huntington Heating & Cooling, Inc., Heating & Air Conditioning, Huntington, IN