For Furnace repair service in Plymouth IN, call Peregrine!
Call Today: (574) 935-4634
Providing Indoor Comfort Since 1959
Office/Showroom
610 E. Jefferson St.
Plymouth, IN 46563
Leave a review of a recent Furnace repair we've done for you in Plymouth IN on Google!
For more info on Furnace repair in Rochester IN, read our Blog.
For your Furnace repair in Plymouth IN, trust a NATE certified customer.
For Furnace maintenance tips in Plymouth IN; follow us on Twitter.
For Furnace repair in Culver IN; like us on Facebook!
For Heating repair in Plymouth IN, follow us on Youtube!
1-855-5bryant 1-855-527-9268


Heat Pump Operation & Maintenance

Operating and Maintaining Your Heat Pump

Proper operation of your heat pump will save energy. Do not set back the heat pump's thermostat if it causes the backup heating to come on -- backup heating systems are usually more expensive to operate. Continuous indoor fan operation can degrade heat pump performance unless your system uses a high-efficiency, variable-speed fan motor. Operate the system on the "auto" fan setting on the thermostat.

Like all heating and cooling systems, proper maintenance is key to efficient operation. The difference between the energy consumption of a well-maintained heat pump and a severely neglected one ranges from 10% to 25%.

Clean or change filters once a month or as needed, and maintain the system according to manufacturer's instructions. Dirty filters, coils, and fans reduce airflow through the system. Reduced airflow decreases system performance and can damage your system's compressor. Clean outdoor coils whenever they appear dirty; occasionally, turn off power to the fan and clean it; remove vegetation and clutter from around the outdoor unit. Clean the supply and return registers in your home, and straighten their fins if bent.

You should also have a professional technician service your heat pump at least every year. The technician can do the following:

  • Inspect ducts, filters, blower, and indoor coil for dirt and other obstructions
  • Diagnose and seal duct leakage
  • Verify adequate airflow by measurement
  • Verify correct refrigerant charge by measurement
  • Check for refrigerant leaks
  • Inspect electric terminals, and, if necessary, clean and tighten connections, and apply nonconductive coating
  • Lubricate motors, and inspect belts for tightness and wear
  • Verify correct electric control, making sure that heating is locked out when the thermostat calls for cooling and vice versa
  • Verify correct thermostat operation.

DOE - U.S. Department of Energy

Check Out Our
Specials & Coupons
Look At Our
Financing Options
Request Information
or Get an Estimate
Geothermal
Tax Credits
Energy Savings
Tips
Client Comments
"One of the best things that I have ever done was to have a geothermal system installed by Huntington Heating."
Doyle Hoover, Wabash Indiana
Peregrine Heating & Cooling is a Bryant Factory Authorized Furnace dealer in Rochester IN.
610 E. Jefferson Street - Plymouth, IN 46563 - 574-935-4634
Furnace Repair Service in Rochester IN
Huntington Heating & Cooling, Inc., Heating & Air Conditioning, Huntington, IN